Description
When your disc gangs start making noise or the blades aren’t cutting as evenly as they should, it’s often a bearing issue that needs attention. This sealed disc bearing is designed to handle the constant punishment of field work—dirt, moisture, and the side loads that come with turning over tough ground. Getting your bearings right means your discs stay true and your implement does what it’s supposed to do.
What You’re Getting
- Sealed design keeps dirt and debris out while holding grease in for long service life
- Spherical outer race design allows for shaft misalignment and reduces stress on housing
- 1-3/4 inch round bore fits standard disc gang shafts on popular tillage equipment
- 85mm outside diameter provides the strength needed for heavy disc applications
- Pre-lubed and ready to install—no need to pack with grease before installation
Built for Real Farm Work
This bearing fits disc harrows from Bush Hog, Ford, Krause, and Massey Ferguson that use 1-3/4 inch round axles. These are typically found on mid-sized to larger disc harrows used for primary tillage, breaking up corn stalks, and working heavy crop residue. Whether you’re running tandem discs or offset units, this bearing handles the job.
Made to Last
The sealed construction means you don’t have to worry about greasing points or contamination getting into the bearing races. The prelube treatment ensures proper lubrication from day one, and the spherical design compensates for the flexing and misalignment that happens in real field conditions.
Installation Notes
This is a direct replacement bearing that fits standard disc gang housings. When installing, make sure the housing is clean and the bearing seats fully. If you’re replacing one bearing on a gang, it’s smart to check the others—they typically wear at similar rates.
Reviews
There are no reviews yet.