Description
Nothing ruins a day of mowing like a bush hog that keeps wandering off to one side, or a disc that won’t track straight no matter how carefully you set it up. A worn or missing stabilizer pin in your three-point hitch is often the culprit – that small but critical part that keeps your stabilizer bar connected and doing its job. This replacement pin gets your stabilizer system working right again so your implements follow where you steer them.
What You’re Getting
- Proper 3-3/8 inch overall length with 7/8 inch diameter for a secure, no-slip fit
- 1/2 inch usable shaft length provides the right engagement without binding
- 5/8 inch National Coarse threads with 1-7/8 inch thread length for solid attachment
- Direct replacement design – no modifications or adapters needed
Built for Real Farm Work
Tractor stabilizer bars keep implements from swaying side to side, potentially damaging the implement or the tractor. This pin ensures your stabilizer system functions properly, reducing wear on both tractor and implement while improving operator safety and work quality. Whether you’re running a rotary cutter on uneven ground or pulling a cultivator through rocky soil, this pin takes the constant stress and keeps everything connected.
Made to Last
Farm equipment pins see tremendous abuse from side loads, vibration, and the elements. This stabilizer pin is built with hardened steel construction that resists bending and wear from repeated use. The precision threading ensures it’ll thread in smoothly and hold tight season after season, even after exposure to mud, moisture, and temperature swings.
Installation Notes
Thread this pin into your stabilizer bracket by hand first to avoid cross-threading, then tighten with the proper wrench. Keep the threads clean and lightly oiled, and check for bent components after striking obstacles. If your old pin was stuck or corroded, a little penetrating oil makes removal much easier than trying to force it.
Reviews
There are no reviews yet.