Description
When your rotary cutter’s tail wheel starts wobbling or making noise, chances are good that the bushing in the hub has worn out. This little part does a big job—it keeps the wheel spinning smooth and centered while you’re cutting pastures or brush. A worn bushing will let the wheel flop around, causing uneven cuts and putting extra stress on the whole assembly.
What You’re Getting
- Precise 1 inch inside diameter fits standard tail wheel assemblies
- 1 3/8 inch outside diameter provides a snug fit in most hubs
- Works as a retrofit solution for many short line equipment models when installed in hub 63813
- Sold individually so you can replace just what you need
Built for Real Farm Work
This bushing is designed for rotary cutters and other agricultural equipment that use tail wheels to support the deck. Whether you’re running a small brush hog on your utility tractor or maintaining fence rows with a bigger cutter, this bushing helps keep things rolling smooth. It’s particularly handy for retrofitting older equipment that might have different bearing setups.
Made to Last
Agricultural bushings take a beating from dirt, moisture, and constant use in the field. This one’s built to handle the loads and conditions that come with cutting operations, from light grass to heavy brush that puts stress on every part of the tail wheel assembly.
Installation Notes
This is a press-fit bushing that goes into the hub bore—you’ll need a bushing driver or appropriately sized socket to install it properly. Two bushings are typically used per hub, so consider ordering what you need for a complete repair. Clean out the old bushing completely before pressing in the new one.
Reviews
There are no reviews yet.