Description
When you’re working on hydraulic connections, PTO assemblies, or heavy equipment repairs, you need bolts that can handle the stress and keep holding tight. This M12 x 60mm hex bolt gives you the strength of Class 8.8 steel with zinc plating to fight off rust and corrosion. It’s the kind of fastener that stays put when the going gets tough.
What You’re Getting
- Class 8.8 tensile strength handles heavy loads and high-stress connections
- Zinc coating protects against rust and extends service life outdoors
- Standard metric threads (M12 x 1.75) fit common tractor and equipment applications
- 60mm length works great for thicker mounting brackets and multi-piece assemblies
- Hex head design gives you solid wrench grip for proper tightening
Built for Real Farm Work
This metric bolt size shows up all over European tractors and modern implements where you need reliable fastening power. You’ll find M12 bolts holding together hydraulic manifolds, loader arms, three-point assemblies, and equipment frames. The 60mm length is perfect when you’re bolting through thick steel or need to clamp multiple components together securely.
Made to Last
Class 8.8 steel puts this bolt in the same strength category as Grade 5 fasteners but with metric threading. The zinc plating gives you good corrosion resistance for outdoor use, though it’s not as heavy-duty as galvanized coating. Still, it’ll handle normal farm conditions and give you reliable service season after season.
Good to Know
Always use a flat washer under the head and nut to distribute the load properly. If you’re replacing rusted bolts, clean out the threads with a tap if needed. A little anti-seize compound on the threads makes future removal much easier, especially if the connection might see heat or hydraulic fluid.
Reviews
There are no reviews yet.