Description
When you’re dealing with rotating shafts in transmissions, differentials, or final drives, you need a bearing that can handle both radial and thrust loads while keeping everything running smooth. This deep groove ball bearing is built to support critical rotating components in your tractor’s drivetrain, keeping things turning freely even under the heavy loads and constant vibration that come with farm work.
What You’re Getting
- Precision-manufactured steel races and balls for long service life under agricultural conditions
- Rubber seals on both sides (RS designation) keep grease in and dirt, moisture, and debris out
- 35mm inner diameter, 80mm outer diameter, and 21mm depth for exact fit in your tractor
- Deep groove design handles both radial loads from rotating weight and axial loads from thrust forces
- Quality construction that meets the demands of heavy-duty agricultural applications
Built for Big Iron Work
This bearing fits the serious workhorses in your fleet – New Holland’s TG and T8 series tractors along with Case IH Magnum and MX series machines. These are the big row-crop and utility tractors that handle your heaviest field work, from deep tillage to heavy harvesting, where drivetrain components take tremendous loads. Whether you’re running a TG285 through tough ground or pushing a T8.435 at full capacity, this bearing keeps critical shafts supported and rotating smoothly.
Made to Last
Farm equipment bearings have to survive conditions that would destroy regular industrial bearings. This bearing is built to handle the mud, dust, moisture, and heavy loads that can quickly destroy inferior bearings, using quality materials that are properly heat-treated and manufactured to handle the demanding conditions of agricultural use.
Installation Notes
This is a direct replacement bearing – measure your shaft and housing to confirm the 35x80x21mm dimensions before ordering. When installing, use a proper bearing driver to avoid damage to the races or seals. Clean the housing thoroughly and inspect for wear or damage that could cause premature bearing failure. A little grease on the outer race helps with installation, but don’t over-pack the housing.
Reviews
There are no reviews yet.