Description
If your cultivator won’t track straight or your bush hog swings like a pendulum every time you lift the three-point, you know how frustrating loose implements can be. This adjustable stabilizer locks your implements in line, eliminating that dangerous side-to-side sway that makes precise work nearly impossible and puts stress on your hydraulic system.
What You’re Getting
- Adjustable length from 470mm to 620mm so you can dial in the perfect fit for different implements
- 20mm rigid eye connections with matching bolts for secure, no-slip mounting
- Heavy-duty steel construction that won’t bend under the side loads of field work
- Direct replacement design that bolts right up with no modifications needed
Built for Real Farm Work
This stabilizer fits the reliable Ford New Holland 40 series, TS series, and 8210 tractors that are workhorses on farms across the country. Whether you’re running a 5640 utility tractor for hay work or an 8210 for heavy tillage, this is the same stabilizer that came on your tractor from the factory. These machines handle everything from cultivation and planting to mowing and loader work.
Made to Last
Built to original equipment specs, this stabilizer handles the constant flex and stress of implement operation season after season. The adjustable design lets you get the right tension for any job – loose enough for implements that need to float, tight enough for rigid control when you need it. Quality steel construction stands up to the bumps, vibration, and side loads that come with real farm work.
Installation Notes
Mounts between your lower link arms using the 20mm eye connections – takes about fifteen minutes to install. Start with the stabilizer set in the middle of its adjustment range, then fine-tune as needed. For implements like finish mowers that need to follow ground contours, leave a little play in the adjustment. For rigid implements like box blades, tighten until side movement is eliminated without binding the system.
Reviews
There are no reviews yet.