Description
When you’re dealing with squealing belts or worn pulleys on your tractor, combine, or implement, this is the replacement part that’ll get you back to smooth operation. This zinc-plated v-belt idler pulley is riveted for strength and durability with no spot welding used, and accurately bore sized for easy, quick mounting on standard 1/2 inch or 5/8 inch bolts. It’s built to handle the constant motion and tension that comes with keeping your belt drives running properly.
What You’re Getting
- 5.00 inch outside diameter v-belt idler that keeps belts tracking straight and tensioned right
- Riveted construction instead of spot welding for strength that won’t fail under load
- Removable sleeve system with 1/2 inch bore standard, 3/8 inch sleeve available for different bolt sizes
- Zinc plating resists corrosion from moisture, fertilizers, and field conditions
- No keyway design means simple installation without alignment headaches
Built for Real Farm Work
This universal idler pulley works on a wide range of agricultural equipment where you need to maintain proper belt tension and alignment. Whether it’s on a combine’s cleaning system, a hay baler’s drive, or a tractor’s cooling fan setup, this pulley handles the job of keeping belts running where they should. The 5-inch diameter gives you the right amount of wrap around the belt for good grip without excessive wear.
Made to Last
Farm equipment runs hard and long, and this pulley is designed to keep up. The riveted construction holds up better than welded pulleys that can crack at the joints, while the zinc plating protects against the rust and corrosion that’ll eat up cheaper pulleys over time. The accurately machined bore means it’ll mount solid on your bolt without wobbling.
Installation Notes
The removable sleeve system lets you use either 1/2 inch or 5/8 inch bolts, with the 1/2 inch sleeve installed standard. Just make sure to check your belt alignment after installation—a properly positioned idler keeps your belts running longer and your equipment running smoother. Clean the mounting bolt threads with a wire brush if you’re replacing an old pulley that’s been on there a while.
Reviews
There are no reviews yet.