Description
When your conveyor or drive system starts slipping or making that grinding noise that means trouble, it’s usually time to look at your sprockets. A worn sprocket will chew up your chain faster than you can believe, and that’s downtime and money you can’t afford during busy season. This 42-tooth sprocket for #50 chain gets your equipment running smooth again and keeps it that way.
What You’re Getting
- Weld construction means the teeth and hub are permanently bonded – no loose teeth or hub failures under load
- 42 teeth give you the right speed reduction for conveyor drives and material handling systems
- Built specifically for #50 chain – the right pitch and profile for smooth operation
- X-Series hub design provides solid mounting on standard shafts
Built for Real Farm Work
This sprocket fits right in on grain handling equipment, feed conveyors, and material handling systems where #50 chain does the heavy lifting. You’ll find this size chain and sprocket combination on everything from grain elevators moving corn to the truck, to feed conveyors keeping cattle fed, to conveyor systems in grain bins and processing facilities.
Made to Last
The weld sprocket design means this part is built to handle the constant flexing, dust, moisture, and shock loads that are part of everyday farm life. It’s engineered to keep working through the vibration of grain flowing over it and the stress of starting up loaded systems, season after season.
Good to Know
Check your shaft diameter and keyway before ordering to make sure everything lines up. When you’re replacing a worn sprocket, it’s a smart time to inspect your chain tension and lubrication – a little maintenance now saves bigger problems down the road. Keep the old sprocket as a spare if it’s not too worn.
Reviews
There are no reviews yet.