Description

When you’re plumbing hydraulic systems on your tractor, sometimes the factory connections just don’t line up the way you need them to. This 90-degree elbow adapter solves that problem by connecting a 7/8-14 JIC line to a 3/4-16 ORB port while giving you a right-angle turn. It’s the kind of fitting that saves you from having to reroute entire hydraulic lines or use multiple adapters.

What You’re Getting

Heavy-duty steel construction rated for 5000 PSI working pressure—built for serious hydraulic systems
Precise thread machining ensures leak-free connections on both the JIC and ORB sides
90-degree configuration lets you route lines around obstacles without kinking or excessive bending
Standard 7/8-inch hex flats make installation straightforward with common wrenches
Male-to-male design connects female ports on cylinders, pumps, and valves

Built for Real Farm Work

This adapter handles the high-pressure hydraulic systems found on modern tractors and implements. Whether you’re connecting a hydraulic cylinder to a valve block, routing lines around tight engine compartments, or adapting aftermarket implements to your tractor’s hydraulics, this fitting provides the professional connection you need.

Made to Last

Farm hydraulics take a beating from vibration, pressure spikes, and temperature swings. This adapter is built from quality steel with precision threads that maintain their seal under pressure. The robust construction handles the 5000 PSI rating without breaking a sweat, so you can count on it season after season.

Installation Notes

Thread both ends in carefully by hand first to avoid cross-threading—hydraulic fittings need to seal properly to prevent costly leaks. Use thread sealant or tape on the JIC side, but remember that ORB fittings seal with their O-ring, not the threads. Tighten to manufacturer specifications, typically hand-tight plus one to two turns with a wrench.