Description

When you’re hooking up hydraulic systems on your tractor or implements, you’ll often run into a mismatch between JIC and pipe thread fittings. This male-to-male adapter bridges that gap, connecting your 1/4 inch JIC (7/16-20) female fitting to 3/8 inch male pipe thread without leaks or hassles.

What You’re Getting

Solid steel construction that stands up to high hydraulic pressures and field conditions
Precise thread machining ensures proper seal without overtightening or cross-threading
Compact design fits in tight spaces where every inch matters
Direct connection eliminates the need for multiple adapters or complicated setups

Built for Real Farm Work

This adapter works with tractors and hydraulic implements across all brands where you need to connect different thread types. Whether you’re hooking up loader hydraulics, setting up remote circuits for implements, or connecting aftermarket equipment that uses different thread standards, this little connector solves the compatibility problem quickly.

Made to Last

Farm hydraulic systems put serious stress on fittings with pressure spikes, vibration, and constant connecting and disconnecting. The steel construction handles these demands while maintaining a reliable seal. AgSmart builds these adapters to meet the same standards as OEM hydraulic fittings.

Good to Know

Always check your thread pitch and sizes before ordering – JIC threads are different from pipe threads, and getting the wrong size means leaks and frustration. When installing, hand-tighten first to make sure threads line up properly, then use a wrench for the final turns. A drop of hydraulic thread sealant helps ensure a leak-free connection.