Description
When you’re plumbing hydraulic lines on your tractor or implement and need to make a 90-degree turn in a tight spot, this swivel elbow fitting is exactly what you need. It connects standard 3/8 male pipe threads to 3/8 JIC female threads while giving you the flexibility to rotate and position your hydraulic line exactly where it needs to go without binding or kinking.
What You’re Getting
- Swivel design lets you position the fitting after installation for perfect hose routing
- Steel construction handles high hydraulic pressures and farm work vibration
- Standard 3/8 male pipe threads connect to most tractor hydraulic blocks and valves
- 9/16-18 JIC female threads fit standard hydraulic hoses and fittings
- 90-degree angle helps route lines around frame rails and other obstacles
Built for Real Farm Work
This fitting works great on loaders, three-point hitches, remote hydraulic circuits, and implement hookups where you need to change direction and thread types in one connection. Whether you’re replumbing a hydraulic cylinder, adding a new remote circuit, or fixing a leaky connection, this adapter handles the job.
Made to Last
Steel construction means this fitting won’t crack like plastic or corrode like some cheaper metals. The swivel joint stays smooth even after years of temperature changes and pressure cycles, so you can adjust your hydraulic lines when needed without fighting a seized fitting.
Good to Know
Use pipe thread compound or Teflon tape on the male pipe threads for a leak-free seal. The JIC connection uses a 37-degree flare and metal-to-metal sealing, so it doesn’t need thread sealant. If you’re working in a tight space, install the fitting first, then connect your hose and rotate everything into position.
Reviews
There are no reviews yet.