Description

When you need to secure exhaust pipes, mount implements, or fasten round tubing on your tractor or farm equipment, this medium-duty round U-bolt gets the job done right. The 9/16 inch thread diameter and 8-inch length give you the holding power for most common farm applications without being overkill for lighter jobs.

What You’re Getting

Medium-duty construction that’s strong enough for most farm work but not unnecessarily heavy
Round design fits pipes and tubes perfectly without crushing or deforming
Quality threads that take a nut smoothly and hold tight under vibration
Standard 9/16 inch diameter works with common nuts and washers you probably have on hand
8-inch length spans most exhaust and implement mounting needs

Built for Real Farm Work

This U-bolt shines when you’re mounting exhaust systems, securing implement hitches, or fastening round tubing on tractors and farm equipment. Whether you’re fixing a loose muffler clamp, building a custom implement hitch, or securing hydraulic lines, the round design won’t crush pipes like square U-bolts sometimes do. It’s the go-to choice when you need to clamp around pipes, tubes, or round stock without damaging what you’re holding.

Made to Last

Farm equipment takes a beating from vibration, weather, and the rough conditions that come with real work. This U-bolt uses quality steel construction that won’t snap under stress or strip out when you’re tightening it down. The finish resists rust and corrosion, so it’ll still look good and function properly seasons from now.

Good to Know

Always use flat washers under the nuts to distribute the load and prevent damage to whatever you’re clamping. When mounting exhaust components, remember that some movement from thermal expansion is normal—don’t over-tighten to the point where things can’t flex slightly. A dab of anti-seize on the threads makes future removal much easier, especially on exhaust applications where heat cycling is involved.