Description

If you’ve ever had a pivot point that’s worn sloppy or a shaft that’s wobbling where it shouldn’t, you know how important the right bushing can be. These narrow rim machinery bushings are the workhorses that keep everything turning smooth and tight. When equipment starts getting loose and rattly, a fresh set of these bushings can bring back that solid, precise feel you had when things were new.

What You’re Getting

High-grade cold rolled machinery steel that resists wear and friction
10 gauge thickness provides the right balance of strength and fit
Narrow rim design fits tight spaces where wide bushings won’t work
Bag of 25 bushings so you can handle multiple repairs or stock up
1-inch diameter fits common shaft sizes on farm equipment

Built for Real Farm Work

These bushings are sized for the pivot points, linkages, and moving parts you’ll find on all kinds of farm equipment. Whether it’s loader arms, cultivator gangs, disc harrow sections, or attachment points on implements, that 1-inch size shows up everywhere. The narrow rim profile means they’ll fit in confined spaces where thicker bushings would bind up or interfere with other parts.

Made to Last

Cold rolled steel gives you the hardness to resist wear while staying tough enough not to crack under load. The 10 gauge thickness is just right – thick enough to handle the forces but not so thick it won’t fit properly. These bushings will stand up to dirt, moisture, and the constant movement that wears out lesser parts.

Good to Know

When you’re replacing worn bushings, take time to clean out the old grease and check the shaft for wear too. A little anti-seize on the bushing before installation makes future removal easier. With 25 in the bag, you can tackle that whole cultivator or disc that’s been getting looser each season.