Description
When your air hose gets nicked by a blade or stepped on by livestock, you don’t have to throw the whole thing away. This brass hose mender lets you cut out the damaged section and splice the good ends back together—saving you money and keeping you running when there’s work to do.
What You’re Getting
- Solid brass construction that won’t crack or split under pressure
- Reusable design means you can take it apart and use it again if needed
- Precise fit for 1/4 inch inside diameter hose with 5/8 inch outside diameter
- No special tools required—just cut the hose square and push it on
Built for Real Farm Work
This mender works great on air tool lines, pneumatic seed meter hoses, and hydraulic return lines where you need a reliable connection that won’t leak. Whether you’re running an impact wrench in the shop or connecting hydraulic cylinders on implements, this little fitting does the job without fuss.
Made to Last
The brass construction handles temperature changes and vibration better than plastic fittings. It won’t get brittle in cold weather or soften in summer heat, and the threads stay tight even after multiple uses.
Installation Notes
Cut your hose ends square and clean, then push each end onto the barbed sections until they bottom out. The compression nut pulls the two halves together and creates a seal that won’t blow apart under normal working pressure.
Reviews
There are no reviews yet.