Description

When you’re running a rotary cutter in tough conditions, having sharp edges on both sides of the blade can make all the difference. This 23-inch dual edge blade is designed for Hardee rotary cutters that spin both directions, so you get twice the cutting life and better performance whether you’re mowing forward or backing up to tackle stubborn brush.

What You’re Getting

Dual cutting edges mean you can flip the rotation and keep cutting when one side dulls
23-inch overall length with 20-1/2 inches from center of hole for plenty of cutting width
Heavy-duty 1/2-inch thick construction stands up to rocks, stumps, and thick brush
3-inch offset gives proper ground clearance while maintaining an aggressive cutting angle
1-1/2-inch center hole fits standard Hardee spindle assemblies perfectly

Built for Real Farm Work

This blade is made for Hardee’s bidirectional rotary cutters that can reverse their spin direction. These machines are popular for cutting pastures, clearing fence rows, and maintaining ditches where you need to back up frequently. The ability to reverse rotation helps clear wrapped material and extends blade life significantly.

Made to Last

AgSmart builds this blade tough enough to handle whatever your land throws at it. The 1/2-inch thickness gives you plenty of material for sharpening, and the dual edge design means you’re getting double the value from each blade. It’s built to the same specs as the original equipment part.

Good to Know

This is a direct replacement that bolts right on with your existing hardware. When one cutting edge starts to dull, you can reverse your mower’s rotation and put the fresh edge to work. Make sure to check your blade bolts regularly and replace them if they show wear—a loose blade can cause expensive damage to your cutter deck.