Description

If you’ve been dealing with sloppy three-point hitch operation or struggling to hook up implements cleanly, chances are your lower link pins are worn out. These Category 2 pins handle all the lifting, lowering, and side-to-side forces when you’re running heavier equipment, and when they’re tired, your whole hitch system suffers. This 1-1/8 inch diameter pin puts everything back to factory-tight operation.

What You’re Getting

Full Category 2 strength with the proper 1-1/8 inch diameter for heavier implements
New type design that incorporates the latest improvements in materials and engineering
Heavy-duty steel construction that won’t bend or break under normal farm loads
Precision machined surfaces for smooth operation and long life in the bushings
Corrosion-resistant finish that stands up to weather and fertilizer exposure

Built for Real Farm Work

This pin fits Massey Ferguson tractors in the 100, 200, 300, and 400 series that came equipped with Category 2 three-point hitches. These are typically the mid-size to larger utility tractors you’d use for running bigger implements like 7-foot rotary cutters, heavy-duty tillers, or larger planting equipment where Category 1 just doesn’t cut it.

Made to Last

The larger 1-1/8 inch diameter isn’t just bigger for show—it distributes the loads better than smaller pins, which means less stress concentration and longer life under heavy use. The new type design uses improved metallurgy and manufacturing processes compared to older pins, so you get better performance right out of the box.

Good to Know

Always replace lower link pins in pairs to keep your hitch operating evenly. Before installing, clean out the bushings and check for excessive wear—if the bushings are shot, new pins won’t fix the sloppiness. A little grease during installation keeps things moving smoothly and prevents seizing up down the road.