Description

Anyone who’s wrestled with stubborn pins on a cold morning knows the difference a good handle makes. You’re trying to hook up your disc or rotary cutter, and the pin won’t budge—that’s when you appreciate having something solid to grab onto instead of fighting with pliers or a hammer. This Category 2 lower link pin gives you the leverage you need to connect implements quickly, even when things don’t line up perfectly.

What You’re Getting

Built-in handle saves your knuckles and speeds up implement changes
Category 2 specification with 1-1/8 inch diameter for mid-range tractors
Heavy-duty steel construction that won’t bend under load
Corrosion-resistant finish stands up to weather and mud
Direct replacement for factory pins—no modifications needed

Built for Real Farm Work

This pin is designed for Category 2 three-point hitches found on tractors from about 40 to 125 horsepower—the workhorses that handle most of the heavy lifting on farms and ranches. Whether you’re running a big rotary cutter, pulling a heavy disc harrow, or hooking up a manure spreader, this is the connection point that takes all the stress between your tractor and implement.

Made to Last

The larger 1-1/8 inch diameter spreads loads better than smaller Category 1 pins, so it handles the side forces when you’re working slopes or making tight turns with heavy equipment. The handle is welded on solid—it won’t snap off the first time you put some muscle into it.

Good to Know

Keep this pin lightly greased so it slides in and out smoothly, especially in dusty conditions. The handle makes it easy to pull the pin even when there’s pressure from misaligned implements. If you’re constantly switching between implements, consider getting a spare set so each tool can have its own pins ready to go.