Description

When you’re setting up irrigation lines or plumbing systems around the farm, sometimes you need to make a tight turn where space is at a premium. A straight fitting with a bent hose usually means kinks, restricted flow, and early failure. This 90-degree poly elbow gives you a clean right-angle connection that keeps fluids flowing smoothly while saving you from wrestling with awkward hose routing.

What You’re Getting

Clean 90-degree turn eliminates hose kinking and flow restriction
Male NPT thread on one end for secure pipe connections
Hose barb on the other end grips flexible hose without slipping
Poly construction resists corrosion and chemical damage
1-inch size handles good flow for irrigation and fluid transfer applications

Built for Real Farm Work

This fitting works great in irrigation systems, livestock watering setups, chemical transfer lines, and anywhere you need to connect rigid pipe to flexible hose at a right angle. The poly material won’t rust like steel fittings and handles most farm chemicals without breaking down. Perfect for those spots where you’re routing lines around equipment or making connections in tight corners.

Made to Last

Poly fittings like this one handle temperature swings better than some alternatives and won’t corrode when exposed to fertilizers or other agricultural chemicals. The molded construction means no weak spots or stress points that fail under pressure. AgSmart builds these to handle the real-world conditions you’ll find around the farm.

Installation Notes

Thread the male NPT end into your pipe fitting using pipe dope or thread tape for a leak-free seal. The hose barb side slips inside your hose – warm the hose end in hot water if it’s stiff, then secure with a quality hose clamp. Check connections after a few uses to make sure everything stays tight.