Brass Hose Barb Fitting for Hydraulic and Coolant Applications

Description

When you’re dealing with hydraulic lines or coolant connections that need a secure, leak-proof joint between pipe threads and rubber hose, this brass fitting gets the job done right. The male pipe thread screws into your equipment while the hose barb grips your rubber hose tight – no more wondering if that connection will hold under pressure when you’re miles from the shop.

What You’re Getting

• Solid brass construction that won’t rust or corrode like steel fittings
• Male pipe threads that seal properly in female threaded ports
• Barbed end that creates a secure grip on rubber hose
• Half-inch sizing that works with common hydraulic and coolant hoses
• Smooth internal passage that maintains proper flow

Built for Real Farm Work

This fitting works great for hydraulic return lines, coolant system repairs, and any application where you need to connect threaded equipment to flexible hose. Whether you’re fixing a loader circuit, rerouting a coolant line away from hot exhaust, or setting up a custom hydraulic application, the brass construction handles the pressure and temperature swings that come with farm equipment.

Made to Last

Brass fittings are the smart choice for hydraulic and coolant applications because they resist corrosion and won’t seize up like steel can. The material machines well, so the threads are clean and the barbs are properly formed. This isn’t the cheapest fitting you can buy, but it’s the one that’ll still be working years from now.

Good to Know

Use pipe thread sealant or Teflon tape on the male threads for a proper seal. The hose barb is designed to work with standard hose clamps – position the clamp over the raised barb section for maximum holding power. If your hose is stiff from age or cold weather, warming it up makes installation much easier.