Description
When you’re running a loader, operating a grader blade, or working with any piece of equipment that needs serious pushing or pulling power, you need a hydraulic cylinder that won’t let you down. This 3-inch bore cylinder with a 14-inch stroke delivers reliable power whether you’re lifting a heavy bale, angling a blade, or pushing through tough conditions. It’s built to handle the daily grind of farm work without missing a beat.
What You’re Getting
- Heavy-duty 3-inch bore delivers plenty of pushing and pulling force for demanding applications
- 14-inch stroke gives you the range of motion needed for most farm equipment operations
- 2500 PSI rating handles high-pressure systems found on modern tractors and implements
- 1/2-inch NPT ports fit standard hydraulic fittings and hoses
- Welded construction eliminates the weak points you find in tie-rod cylinders
Built for Real Farm Work
This cylinder is designed for the kind of work that puts equipment to the test. You’ll find cylinders like this powering front-end loaders, adjusting implement angles, and handling the heavy lifting on everything from hay equipment to grain handling systems. The 24-1/4 inch closed center-to-center dimension makes it a direct replacement for many factory cylinders.
Made to Last
Cross builds these cylinders with welded construction instead of tie rods, which means no weak points where bolts can loosen or threads can strip. The welded barrel and end caps create a solid, one-piece unit that holds up to the constant pressure cycling and shock loads that come with farm work.
Good to Know
This is a direct bolt-in replacement for most applications with the same bore, stroke, and mounting dimensions. The 1-inch clevis pin holes accept standard pins, and the 1-1/4 inch rod diameter provides the strength you need without being oversized. Always check your hydraulic system pressure before installation to make sure it doesn’t exceed the 2500 PSI rating.
Reviews
There are no reviews yet.