Description
When you’re running hydraulic lines around tight spots on your tractor or implement, sometimes you need to make a turn without kinking the hose or fighting awkward angles. This 45-degree elbow fitting gives you that smooth directional change while keeping full hydraulic flow where you need it most.
What You’re Getting
- 45-degree angle that’s perfect for routing lines around frame rails and cylinders
- BSPP female threads with straight thread design and O-ring seal
- Crimp-on connection that creates a permanent, leak-free bond with your hose
- Quality steel construction with zinc plating to resist corrosion
Built for Real Farm Work
This fitting works on tractors, loaders, and implements where you need to change hydraulic line direction without sharp bends. Whether you’re connecting auxiliary hydraulics on a rotary cutter, routing power steering lines, or plumbing loader cylinders, the BSPP threads are common on European equipment and some domestic machinery too.
Made to Last
Quality crimp fittings like this handle the pressure spikes, vibration, and contamination that come with farm hydraulic systems. The zinc plating protects against moisture and chemicals, while the steel construction stands up to the constant movement and pressure changes of working equipment.
Good to Know
This is a crimp-on fitting that requires proper crimping equipment and dies for your hose size. BSPP threads use a straight thread with O-ring seal, so don’t over-tighten them—hand tight plus a quarter turn with a wrench is usually perfect. Make sure your hose is cut square and clean before crimping for the best seal.
Reviews
There are no reviews yet.