Description

When your trusty Ford 5000 starts blowing blue smoke or you’re hearing that telltale knock from the bottom end, it’s time for more than just crossing your fingers. These 60-75 HP workhorses power through everything from tillage to hay work, but after decades of hard use, those engine internals need a complete refresh. This comprehensive overhaul kit gives you everything needed to bring that 256 cubic inch diesel back to like-new performance.

What You’re Getting

Oversized .020 inch pistons and rings that restore proper compression and seal those worn cylinder walls tight
Complete gasket set ensures every joint and seal is fresh—no more oil weeping or coolant mixing
All new valves, springs, and hardware that’ll have your engine breathing properly again
Pin bushings and cam bearings included so you’re not mixing old wear parts with new pistons
Everything’s matched and tested to work together as a complete system

Built for Real Farm Work

This kit is engineered specifically for the Ford 5000’s four-cylinder diesel that powered thousands of farms from 1968 to 1975. Whether you’re running a loader, pulling implements, or doing heavy tillage work, this engine was designed to handle whatever you throw at it. The 4.4-inch bore and 256 cubic inch displacement gave these tractors the torque farmers needed for real work.

Made to Last

These aren’t budget parts—this is a Tru-Power kit built to handle the stresses of farm life. The oversized pistons accommodate normal cylinder wear, while the complete valve train components restore proper timing and compression. Every gasket and seal is designed to handle the heat cycles and vibration that come with years of field work.

Installation Notes

This is a complete teardown job that requires engine removal and full disassembly. Plan on machine shop work to hone the cylinders for the oversized pistons and check the crank for wear. While you’ve got everything apart, it’s a good time to inspect the oil pump and water pump too. Take photos during disassembly—it makes reassembly much easier when you’re putting it all back together months later.