Clevis End Safety Pin for John Deere Hydraulic Systems and Implements

Description

When you’re hooking up implements or working on hydraulic cylinders, you need that clevis pin to stay put. This safety pin does the simple but critical job of keeping your clevis pin from backing out when you’re bouncing across rough ground or dealing with vibration from PTO-driven equipment. It’s the little part that prevents big problems—like losing hydraulic pressure or having an implement come loose mid-field.

What You’re Getting

• Spring steel construction that flexes without breaking under field conditions
• Zinc plating for rust resistance even in wet, muddy work environments
• Easy insertion and removal when you need to service or disconnect equipment
• Proper sizing to fit snugly without being too tight to handle with work gloves

Built for Real Farm Work

This safety pin works with John Deere hydraulic systems and various implements where clevis connections are used. You’ll find these on loader cylinders, three-point hitch attachments, hay equipment, and tillage tools. It’s designed to handle the constant movement and stress that comes with farm work, from the gentle rocking of a mower deck to the heavy jarring of a chisel plow hitting rocks.

Made to Last

The spring steel material holds its shape through thousands of flex cycles, and the zinc coating prevents the rust that can make pins impossible to remove. This isn’t a hardware store substitute—it’s built to the same standards as the original equipment and will handle whatever your operation throws at it.

Good to Know

Keep a few spares on hand since these pins have a way of disappearing when you need them most. Installation is straightforward—just slide it through the hole in the clevis pin until it seats properly. If the pin feels stiff going in, check that the clevis pin hole isn’t packed with dirt or old grease.