Description
When you’re working on tight hydraulic connections around the loader, remotes, or PTO systems, sometimes you need that perfect angle to get everything to line up right. This 90-degree swivel elbow takes the strain off your hydraulic hoses and connections, letting you route lines cleanly without kinks or sharp bends that cause premature failure.
What You’re Getting
- 3/4-16 JIC threads on both ends for a secure, leak-free connection
- Female swivel end rotates freely to eliminate stress on hoses during operation
- 5000 PSI working pressure rating handles high-demand hydraulic applications
- Steel construction with proper plating resists corrosion and thread galling
- 13/16″ hex body and 7/8″ nut hex make installation straightforward with common tools
Built for Real Farm Work
This adapter works great on tractors with hydraulic remotes, loaders, and PTO-driven equipment where space is tight and hose routing matters. Whether you’re plumbing a new implement or fixing a leaky connection that’s been bugging you all season, having the right angle makes all the difference between a clean installation and a mess of kinked hoses.
Made to Last
The steel construction and proper heat treatment mean this fitting won’t crack under pressure or strip out when you’re working in less-than-ideal conditions. The swivel joint is machined to close tolerances so it moves smoothly but seals tight, and the JIC thread form creates a metal-to-metal seal that stays put.
Good to Know
Always use a backup wrench on the hex body when tightening the swivel nut to avoid putting torque on your hose or other fittings. A light coat of anti-seize on the threads makes future maintenance easier. If you’re replacing an existing elbow, double-check that both ends are indeed 3/4-16 JIC before ordering.
Reviews
There are no reviews yet.