Description
When you’re working with hydraulic cylinders day in and day out, keeping those pivot pins properly lubricated makes all the difference in how smooth your loader, three-point hitch, or front axle operates. This grease nipple threads right into the ram pin and gives you a proper grease point so you can keep everything moving freely and prevent those expensive wear problems that come with dry pins.
What You’re Getting
- M14 x 1.5 thread pitch fits perfectly in your hydraulic ram pin – no guessing on thread size
- Large 40-degree angle design makes it easy to get your grease gun connected even in tight spots
- Heavy-duty construction handles the pressure and vibration that comes with hydraulic work
- Direct replacement part that works with the specified ram pin (part 7461) for a complete setup
Built for Real Farm Work
This grease nipple is designed for the hydraulic systems on a wide range of Ford New Holland tractors from the 35 series utility models up through the big T7000 series machines, plus Fiat tractors from the L series through the Winner series. Whether you’re running a front-end loader, operating your three-point hitch, or working the hydraulics on your front axle, this fitting ensures you can properly maintain those critical pivot points.
Made to Last
Farm hydraulics take a beating with constant pressure cycling, dirt, and moisture. This grease nipple is built to handle those conditions with quality materials that won’t strip out or leak under pressure. The fitting stays tight and keeps doing its job through countless grease cycles.
Good to Know
Installation is straightforward – just thread it into your ram pin until snug. Don’t over-tighten as you can damage the threads. When greasing, pump until you see fresh grease coming out of the pin joints, which means you’ve pushed out the old contaminated grease. Regular greasing every 50 hours or so will keep your hydraulics operating smoothly and extend component life significantly.
Reviews
There are no reviews yet.