Description

When your cultivator leaves ridges down the field or your rotary cutter won’t trim evenly, the first place to check is your 3-point hitch leveling system. That distinctive clunking sound when you raise or lower implements? That’s usually worn leveling box pins talking to you. This 25mm top pin is one of the critical wear components that keeps your implements level and your field work looking professional instead of amateur.

What You’re Getting

Precision 25mm diameter for exact factory fit with no slop or binding
Hardened steel construction that resists wear from constant adjustment
Machined smooth surface that slides freely even after years of use
Direct replacement that installs without any modifications or adapters
Works with the matching bottom pin to restore full leveling control

Where This Part Shines

This pin fits the leveling systems on New Holland T5, T6, T7, T6000, TM, and TSA series tractors – machines that see everything from finish mowing and cultivation to heavy tillage and harvest work. Whether you’re running a disc harrow behind a T6 or pulling a manure spreader with a TM series, proper implement leveling makes the difference between professional results and having to go back and fix your work.

Built to Handle the Load

Every time you adjust your implement level or change attachments, these pins take the full stress of hydraulic forces and implement weight. The hardened steel construction prevents the oval wear that creates that annoying slop, while the corrosion-resistant finish handles moisture and chemical exposure season after season.

Good to Know

Support any attached implement before starting work, and use penetrating oil if the old pin is seized. Clean the pin bore thoroughly and check for wear – if the hole is worn oval, you might need bushings too. Install with a light coat of anti-seize to prevent future problems. While you’re in there, check the bottom pin as well since they typically wear at similar rates.