Description

When you’re heading out to cut pastures or maintain fence rows with your Bush Hog rotary mower, the last thing you want is a PTO driveline failure that leaves you stranded in the field. This 35 series yoke and tube assembly is the vital connection that transfers power from your tractor to your mower, handling all the torque and constant angle changes that come with real mowing work. If your current driveline is showing wear, vibrating, or making noise, this Weasler-built replacement gets you back to cutting grass instead of fixing equipment.

What You’re Getting

Square shaft design with 1-3/16 inch diameter handles power transfer without slipping under load
35 series size with 1-1/4 inch bearing cap diameter fits common 40-100 HP driveline applications perfectly
Durable tube construction with 2-1/8 inch outside diameter provides strength for demanding mowing conditions
Precise 34.69 inch shaft length from center bearing gives you the exact reach your Bush Hog mower needs
Weasler quality construction means forged tough components machined to tight tolerances

Built for Real Mowing Work

This driveline assembly transfers all your tractor’s power to your Bush Hog rotary mower, whether you’re cutting overgrown pastures, maintaining roadsides, or clearing brush. The 35 series is perfectly sized for mid-range tractors running Bush Hog mowers, giving you the power transfer you need without being overkill for the application. It’s right at home on those 40-80 horsepower tractors running rotary cutters where reliable power transfer is essential.

Made to Last

The bearing surfaces are ground smooth and the assembly is built to handle constant speed changes and angles that come with real field work – this isn’t hardware store quality that’ll leave you stranded. Weasler doesn’t mess around with PTO components, using precisely machined components that maintain exact angles and tight tolerance bearings for smooth rotation.

Installation Notes

This is a direct replacement for worn Bush Hog mower drivelines with the same 35 series specifications. Installation is straightforward – slide the yoke onto your mower’s square shaft and secure with appropriate hardware. Make sure your existing driveline is also 35 series for proper compatibility – mixing different series sizes causes premature wear and potential failure.