Heavy Duty Category 3 Top Link Knuckle with Hook Ends – 28mm, 380mm Tube

Description

When you’re working with implements that need to flex and articulate over rough terrain, this heavy-duty Category 3 top link with knuckle hooks is exactly what you need. The knuckle ball design is a game-changer for operators who work uneven ground or need maximum flexibility in their three-point setup. Unlike standard pin-style connections that bind up and wear out, these ball joints articulate smoothly even under heavy draft loads. This isn’t your typical top link—it’s built to handle the real-world demands of serious farming equipment.

What You’re Getting

• Category 3 sizing designed for large-frame tractors (typically 140+ horsepower)
• Knuckle hook design that articulates freely and reduces binding compared to standard pin connections
• 380mm heavy-duty tube construction that won’t bend under extreme loads
• Adjustable length from 621mm to 860mm gives you plenty of range for different implements and terrain
• Black finish provides corrosion resistance for long outdoor service life

Built for Real Farm Work

This heavy-duty Category 3 top link is built for those large-frame tractors pulling monster discs, heavy chisel plows, and commercial-grade equipment. It’s especially valuable when you’re working hillsides or rough terrain where your implement needs to float independently of the tractor. Whether you’re running a heavy offset disc, deep-ripping hardpan, or pulling a big field cultivator, this top link keeps your implement properly connected while allowing the movement it needs.

Made to Last

That 380mm tube isn’t just thick for show – it’s engineered to handle the massive forces generated by Category 3 implements. When you’re pulling a 12-bottom plow through heavy clay or running a 40-foot field cultivator, the top link takes incredible stress. The heavy-duty construction and quality materials mean this link will keep working season after season, even under the toughest conditions.

Installation Notes

Those knuckle ball ends need to move freely – a shot of grease keeps them happy and prevents premature wear. The wide adjustment range gives you flexibility to set your implement angle just right for different field conditions. Start with the link centered in its adjustment range so you’ve got room to fine-tune both ways as needed.