Description

When you’re running disc equipment and that annoying grinding noise starts coming from the gang bearings, it’s time to swap them out before they tear up your axle shafts. This sealed disc bearing is built for the side loads and impacts that come with working through crop residue and loose soil conditions on utility discs and smaller tillage equipment.

What You’re Getting

Sealed construction keeps dirt and moisture out while holding grease in
Square bore design provides positive engagement with no slippage under load
Spherical outer race self-aligns to reduce stress on housing castings
Heavy-duty construction handles the stop-and-go operation of disc work
Pre-packed with quality disc bearing grease that won’t break down in the field

Built for Real Farm Work

This bearing is designed for utility discs and lighter tillage equipment where 1-inch square axles are common. You’ll find this size on smaller disc harrows, utility discs used for food plot preparation, and compact equipment that handles pasture renovation or light residue incorporation work.

Made to Last

The sealed construction means you don’t have to worry about greasing schedules or contamination from field dust. The bearing comes pre-packed with quality grease that’s formulated for disc bearing applications. The spherical outer race design lets the bearing handle misalignment that’s common in field conditions without binding up or wearing prematurely.

Good to Know

This is a direct replacement that installs just like your original bearing. Clean the axle shaft thoroughly before installation and check for wear or scoring that could damage the new bearing. While you have the gang apart, inspect all bearings on that shaft. They typically wear at similar rates, and replacing just one often means you’ll be back under there next season.