Description
When you’ve got serious horsepower running implements that need 1000 RPM, your PTO shaft is what delivers all that power to where it’s needed. This 21-spline PTO shaft handles the big jobs that standard 540 RPM setups can’t touch—think heavy-duty balers running at full capacity, large shredders tackling overgrown fence rows, or high-capacity manure spreaders pushing through thick material. If your current shaft is worn or damaged, you know how frustrating it is when implements bog down or slip under load.
What You’re Getting
- 1000 RPM speed rating for high-capacity implements that need serious power
- 21-spline design transfers maximum torque without slipping under heavy loads
- Direct replacement for Ford New Holland TW, 10, 30, 40, 70, and TS series tractors
- Robust construction that handles full engine torque from larger horsepower machines
- Precision-cut splines ensure positive engagement every time you connect
Built for Heavy-Duty Operations
This shaft is designed for the workhorses in your fleet—those TW series tractors pushing 150+ horsepower, or the big 10 and 30 series machines that handle your toughest fieldwork. Whether you’re running a large square baler during hay season, operating a heavy-duty tiller in tough ground, or powering a feed mixer that needs consistent high-speed operation, this PTO shaft delivers the reliability you need when there’s no time for equipment failures.
Made to Last
The 21-spline design distributes power loads across more contact points than lighter-duty shafts, reducing stress and extending service life. Heat-treated construction resists the wear that comes from frequent engagement cycles and high-torque applications. This isn’t a shaft that’ll twist or strip when you’re pushing maximum power through demanding implements.
Installation Notes
Installation is straightforward—just slide out the old shaft and install the new one. The 21 splines provide positive engagement, but make sure you’re connecting to implements rated for 1000 RPM operation. Using the wrong speed setting can damage both your implement and your shaft. Clean the splines and apply a light coat of grease before installation for smooth operation and longer life.
Reviews
There are no reviews yet.