Description

When white smoke’s pouring from your exhaust and coolant’s disappearing faster than you can add it, your Ford 4000’s head gasket has likely given up the fight. A blown head gasket isn’t just inconvenient—it’s expensive if you let it go too long. This replacement gets your three-cylinder diesel sealed up tight again, stopping coolant leaks and restoring the compression your engine needs to pull strong.

What You’re Getting

1.40mm thickness matches original equipment specifications for proper compression
Multi-layer composite construction that handles the heat cycling and pressure spikes of diesel operation
Quality materials that resist coolant and oil degradation over thousands of hours
Direct fit replacement—no machining or modifications needed

Built for Real Farm Work

These Ford 3-cylinder tractors are everywhere – the 2000, 3000, and 4000 series, plus the newer 2600, 3600, 4600, 4100, and x610 models. They’re the do-everything tractors on small to medium farms, perfect for loader work, mowing, raking, and light tillage. These engines are nearly bulletproof when maintained right, but they need a good head gasket to keep compression where it belongs.

Made to Last

The 3-cylinder Fords have an exhaust crossover in the manifold for cold weather starting, so this gasket sees serious heat. A quality gasket like this maintains its seal through thousands of heat cycles, keeping your engine running smooth and clean. The composite construction won’t blow out under pressure like cheaper gaskets tend to do.

Good to Know

Head gasket replacement is a serious job that requires pulling the head and checking for warpage—not a quick Saturday morning fix. Clean both surfaces thoroughly – any old gasket material or dirt will cause leaks. These 3-cylinders are sensitive to air leaks, so take your time getting it right. If you’re doing the work yourself, invest in a torque wrench and follow the proper tightening sequence.