Description

When you’ve got pins wearing out in your three-point hitch, cultivator pivots, or other moving parts on your equipment, this is the kind of bushing that stops the slop and gets things working smooth again. Made from bronze, it handles the constant motion and heavy loads that come with real farm work without wearing out like cheaper alternatives.

What You’re Getting

Solid bronze construction that won’t seize up or wear out quickly like steel-on-steel
1-7/8 inch inside diameter fits standard agricultural pins and shafts
Self-lubricating properties reduce maintenance and extend service life
Precision-sized to eliminate play and binding in worn pivot points
Corrosion-resistant material handles moisture and chemicals without deteriorating

Built for Real Farm Work

This bushing is sized for the heavy-duty applications you find on cultivators, plows, harrows, and three-point equipment where pins take a beating from dirt, moisture, and constant flexing. It’s the same type of bronze bushing that’s been keeping farm equipment running smooth for decades, whether you’re working tillage tools or maintaining loader arms.

Made to Last

Bronze bushings are the gold standard for agricultural applications because they’re self-lubricating and won’t gall or seize like steel bushings do. The material naturally resists corrosion from moisture and chemicals, and it wears gradually rather than suddenly failing like cheaper alternatives.

Installation Notes

Most installations require pressing the bushing into place with a hydraulic press or proper bushing driver. Clean out the old bushing completely and check that the bore isn’t worn oversize before installing. A light coat of grease on the pin helps things work smoothly from the start.